HALNZIYE® HY410 Thermal Grease Compound For Hair Straightener Ceramic Heater Elements by Halnziye®

Code haln
£0.00
£2.10
Code haln
£0.00
£2.10
Save
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.

  • Description

    Halnziye HY410 Silicone Thermal Paste

     (As used by our technicians on all our heater repairs)

    HY410 (HY-410) White Silicone Compound Thermal Conductive Grease Paste For CPU / GPU /  LED IC / Chip Processor / Graphics Card / Heat Sink Cooling / Cooler Radiator.

    It is widely used in the manufacturing industry due to its low cost and high performance compared to other brands. Under normal temperature the paste is residual and easily forms a thermal coating on the component it has been applied to.

    This thermal paste is widely used for CPU/GPU cooler, Boards, Fans and Board Bonding ,LED heat sink,TV Monitors, Air Conditioning Units, Audio Equipment,Cookers, Amplifiers, VCD, DVD, Communications Equipment and other electrical products with heat producing components.

    Features:

    • Non-toxic, non-corrosive.
    • Low thermal resistance and high thermal conductivity.
    • Composed of carbon micro-particles which effectively offer an extremely high thermal conductivity this guarantees that heat generated from the CPU or GPU is dissipated efficiently.
    • The paste itself is metal-free and non-electrical conductive which eliminates any risks of causing short circuits if it is in contact with other components, adding more protection to the CPU and VGA cards.
    • With an ideal consistency, it is very easy to use, even for beginners. 
    • Once applied, you do not need to apply it again for over 24 months in normal operation.

    Specifications:

    • Color : White
    • Model : HY410
    • Thermal conductivity > 1.93 W/m-k
    • Thermal Impedance <0.225
    • Specific Gravity >2.0
    • Viscosity 1000
    • Thixotropic Index 380+_10
    • Viscosity -50~300
    • Operation Temperature -30~300
    • Silicone Compounds 50%
    • Carbon Compounds 30%
    • Metal Oxide Compounds 20%
    How To Use
    • Clean both surfaces, wipe the surface lightly with a cotton ball or cotton swab dampened with Isopropyl Alcohol.
    • Place a small amount of thermal paste to one side of the component, spread it evenly, best thickness is 0.13~0.15mm
    • Attach the component with very slight pressure and once attached allow to settle.

    Applications:

    Computer electronic components, LED heat sinks, power supply units, CPU heat sinks, and other heat producing components. 

    Notes:

    • Keep away from children.
    • It is recommended to wear gloves when using and advoid contact with surfaces and clothing.

    Depending on the quantity you require HY410 comes in various sizes and packaging which you can choose from the drop down list.