MK4 NEW COMPATIBLE AND USED PARTS FOR ALL GHD MODEL 4.0B CLASSIC HAIR STRAIGHTENERS
New Compatible Manufactured And Used GHD Parts
- Simply choose the part you require from the drop down list.
- New parts are NOT manufactured by GHD and are compatible products.
- Used parts are manufactured by GHD and are original GHD manufacture.
- All used GHD parts are removed from donor GHD so will show signs of use including scratches and marks, but all have been fully cleaned and tested prior to sale.
- This model had either two 50 ohm R8 / R11 resistors or one 100 ohm resistor on the PCB.
- Used PCB are original genuine motherboards (round and square buzzers) which have been re-programmed and repaired, due to this, signal tones may differ and LED lights as well as the boards may be a different colour.
- This model had three different motherboards fitted so please check to ensure compatibility.
- Be advised that this model utilised 3 different types of power cable. You will need to open the GHD and check the cable connector inside the GHD to ensure you purchase the correct one.
- If the connector for the cable inside the GHD is metal you need a MK3.1B cable.
- If the connector for the cable inside the GHD is black plastic you need a MK5 cable connector and MK5 cable.
- If the connector for the cable inside the GHD is clear plastic the MK5 or the MK4.2B cable is the correct one.
- PLEASE CHECK THE CABLE CONNECTOR BEFORE ORDERING CABLES.
- Compatible manufactured parts have been produced by Siriushair® and are direct replacements for the original GHD component.
- If you have a limited edition coloured GHD please choose the classic model.
Product tabs
£0.00
£1.99
Earn 0Reward points