MK4 NEW COMPATIBLE AND USED PARTS FOR ALL GHD MODEL 4.1B CLASSIC HAIR STRAIGHTENERS

MK4 NEW COMPATIBLE AND USED PARTS FOR ALL GHD MODEL 4.1B CLASSIC HAIR STRAIGHTENERS

New Compatible Manufactured And Used GHD Parts

  • Simply choose the part you require from the drop down list.
  • New parts are NOT manufactured by GHD and are compatible products.
  • Used parts are manufactured by GHD and are original GHD manufacture.
  • All used GHD parts are removed from donor GHD so will show signs of use including scratches and marks, but all have been fully cleaned and tested prior to sale.
  • This model came with either two R8/R11 50 ohm resistors or one 100 ohm resistor fitted to the PCB.
  • Used PCB are original genuine motherboards (round and square buzzers) which have been re-programmed and repaired, due to this, signal tones may differ and LED lights as well as the boards may be a different colour. 
  • This model had three different motherboards fitted so please check to ensure compatibility.
  • Be advised that this model utilised 3 different types of power cable. You will need to open the GHD and check the cable connector inside the GHD to ensure you purchase the correct one.
  • If the connector for the cable inside the GHD is metal you need a MK3.1B cable.
  • If the connector for the cable inside the GHD is black plastic you need a MK5 cable connector and MK5 cable.
  • If the connector for the cable inside the GHD is clear plastic the MK5 or the MK4.2B cable is the correct one.
  • PLEASE CHECK THE CABLE CONNECTOR BEFORE ORDERING CABLES.
  • Compatible manufactured parts have been produced by Siriushair® and are direct replacements for the original GHD component.
  • If you have a limited edition coloured GHD please choose the classic model.

Product tabs

    £0.00
    £1.99
    Earn 0Reward points

    QTY