GHD®

GHD® Ceramic Heater Elements

GHD®

GHD® Ceramic Heater Elements

Code
£0.00
£6.99

Add to wishlist

We're sorry it's out of stock

We can let you know when it's available if you enter your email address below.

You will earn 0 reward points with this purchase

Product tabs

  • Please ensure you are suitably qualified and equipped to carry out electrical repairs. 
  • The model number of your GHD® hair straightener is found on the identification label on the non switch side arm of the GHD.
  • Used original GHD ceramic heater elements are removed from working appliances, cleaned and tested before dispatch, however being used they will have signs of use and residual thermal paste.
  • Original GHD size and connection eyelets for correct fit.
  • Ceramic heaters are ALL tested before dispatch and used items security marked.
  • Once a ceramic heater has been received please ensure you have tested it is operational yourself with a multimeter, before fitment.
  • If the heater has been fitted you have indicated it was not faulty upon arrival.
  • Failed heaters after fitment indicate another fault with the GHD such as capacitor, resistor, thermistor or the PCB and are not a fault of the heater which was operational before fitting.
  • All heaters which have been fitted, both new and used original, can only be refunded to 50% of its purchase price.
  • These are the ceramic heaters only..... they do not have thermistors or fuses attached, if this type of heater is required please look at our other ceramic heater elements.
  • TUV / CE Certified UK RoHS compliant.
  • GHD originally used a PEPI H1 thermal fuse on their ceramic thermistor heaters however on the latest GHD ORIGINAL S4C242 the fuse is an  axial thermal fuse encased in an aluminium case which is then soldered using high temp solder to the heater. 
  • We have ascertained from this upgrade and previous faults, that the PEPI H1 has a design fault in that oxidation occurs and the metal pads on the heater are corroded by the electrical circuit and the contact is lost which is why you often see a working heater and PEPI H1 but still the GHD is faulty. 
  • By cleaning the two heater contacts contacts and soldering the axial fuse with high temp solder, this issue is prevented and the fault resolved.
  • We have manufactured the axial fuse with a similar aluminium casing so it remains in contact with the heater, we also have the high heat solder available (set soldering iron to 400 degrees celsius) to affix.
  • PLEASE ensure after carrying out any repair to a GHD you leave for 30 minutes before use to ensure the temperature has settled and the safety cut out feature activates correctly.
  • International buyers – please note: Import duties, taxes, and charges aren’t included in the item price or postage cost. 
  • Importation tax and government levies are the buyer's responsibility. 
  • Please check with your country's customs office to determine these additional costs