GHD SS 5.0 MAX Wide Hair Straightener Repair Kit
If you have a faulty GHD 5.0 MAX and are unsure which components have failed we have made this kit to include the main components which do fail to enable you to repair or service your GHD hair straightener.
This kit includes 2 x 70 Ohm PTC wide (70mm x 20mm) ceramic heating elements, one with thermistor fitted, to replace failed heaters on all Wide MAX GHD 5.0 hair straightener, these will not fit the MS (Thin) or classic (normal 1 inch) version.
1 x sachet of thermal compound to ensure even heat distribution when heater is fitted to the ceramic plate, this should not be used on the thermistor heater element side.
2 x 50 Ohm resistors to replace the R8 / R11 resistor if failed.
1 x Thermal Fuse
- Components are GHD compatible.
- Heaters are fast heat production to reach maximum temperature as original.
- High rate of heat distribution across the element resisting temperature variations.
- Eco-friendly alumina manufactured heater.
- Original GHD size connection eyelets for correct fit on fuse and heater elements.
- Polyamide heat resistant tubing as used on original GHD heater elements.
- Original red GHD composite insulation.
- Lead wires to exact length as the original components.
- UL certified.
- UK RoHS certified.