Thermal Fuse For Cloud Nine Hair Dryer (C9-HD) Repair by Cloud Nine Hair®

Code 375602632677
£0.00
£3.99
Code 375602632677
£0.00
£3.99
Save
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.

  • Description
    Replacement Thermal Fuse For Cloud Nine® Hair Dryers
    • A common fault with a hairdryer is the failure of the thermal fuse, this can be simply due to excess use, or age of the fuse.
    • You will need a multimeter to test the continuity of the thermal fuse to see if it is Open Circuit (OC).
    • Thermal fuse failure, is usually indicated by no heat or no power, depending on the Cloud Nine hairdryer model version.
    • Here at Siriushair® we have been carrying out repairs on both GHD and Cloud Nine hair styling appliances since 2005 and have designed, manufactured and sourced many parts to enable others to save money and the environment by repairing there hair appliances.
    • You need to have a knowledge of electrical appliance repair, the use of a multimeter and a soldering iron to carry out this repair.
    • If uncertain seek the assistance of a suitably qualified individual.

    This thermal fuse is located in our images and you will need to use wire cutters to remove the OC thermal fuse, The replacement thermal fuse is then cut to size and solder applied to the two brass rings on the heater component.

    • The fuse we use is from our supplier of thermal fuses whom we have been using for over 10 years so we know the quality.
    • All our fuses are manufactured to the highest standards and also certified and accredited.
    • Fusing Temperature 167 degrees.
    • Rated Current 16 amps
    • Rated Voltage 250v